BLW-54CW includes the following features:

• A single 10/100BaseT WAN port to connect with DSL or cable modems
• 4 x 10/100Mbps switch LAN ports
• 1 IEEE 802.11g Wireless AP
• Built-in NAT function: allows multiple PCs and devices to share one public IP address
• Full SPI Firewall
• Browser-based configuration and management

Wireless Functionality:

• IEEE 802.11g standard
• WPA Home approved to support WPA-PSK functions
• WPA and WPA2 support
• 802.11i support
• WMM 802.11e support as it becomes supported by the chip vendor
• Wireless MAC filter of 40 entries

WAN Side:

• Single 10/100 Auto-MDIX Ethernet for Cable modem or DSL. Auto Negotiating, full & half duplex.
• Flow Control, pause frames in full duplex, backpressure in half duplex.
• PPPoE
• Capable of establishing PPTP tunnels over static IP link to establish Internet access links with the ISP
• Australia Bigpond Heart Beat signal support
• DHCP client with automatic address renewal
• DynDNS support
• Capable of having a static IP address on WAN port
• Capable of specifying a Host name on the WAN side
• Capable of Cloning a MAC address for the WAN port
• DMZ support for single host PC
• IP QoS support for 10 entries by TCP/UDP and/or 5 entries by MAC address

LAN Side :

• 4 x 10/100 Auto-MDIX switched auto-negotiate ethernet ports
• 1 x 802.11g wireless AP
• Flow Control, pause frames in full duplex, backpressure in half duplex.
• Configurable Static IP address
• DNS relay
• RIP 1 and static routing

Router & Security :

• Full SPI firewall
• Denial of Service protection
• Stateful Packet Inspection can be selected by an option in the GUI
• Network Address Translation NAT (can be enabled or disabled)
• Port Address Translation PAT
• Multiple VPN pass through for PPTP and IPSec
• One to One NAT support of Virtual DMZ
• URL keyword blocking (with separate allow and block lists)
• Ability to control filtered/unfiltered access to Internet based on PC
• IP address and Time (scheduling).
• Static Route capable of supporting Host Route , Network Route
• Remote Syslog functionality
• Scheduling
• Function to allow for management for a list of trusted stations only
• MSS Clamping
• Ping , and Traceroute utility

Configuration :

• Browser based GUI with Office Connect look & feel
• Discovery Application to find the unit without knowing the IP address
• Access to Web interface from the WAN if enabled
• Password protected admin screens
• Event logging
• Setup wizard for initial configuration
• Structure the software so that 5 different languages can be
• uploaded to the GUI

---

GW-US54GXS links network users to LAN services without the hassle of cabling or wiring, which significantly brings mobile workers the freedom of staying connected to the network while roaming around a building or multiple buildings maintaining access to the Internet, e-mail, networked applications, and print services.

This device is the perfect solution for your wireless network applications based on the IEEE 802.11g standard that offers a data rate up to 54Mbps in a wireless LAN environment. It is a high-speed wireless network card that plugs into your system and accesses to the LAN or peer-to-peer networking easily without wires or cables. No matter where it allows you to share printers, files, and other network resources.

Wi-Fi certified
The GW-US54GXS is Wi-Fi certified in the IEEE802.11g data transfer mode. The Wi-Fi certification serves as a guarantee of interoperability between wireless devices from different vendors.

Supports multiple communication modes
In addition to Ad Hoc mode (802.11 Ad Hoc) for direct wireless communication between wireless devices, the product supports Infrastructure mode in which wireless communication is performed via access points (AP).

Simple software AP function
Support software of bridge on Win 98SE, WinME, Win2000, WinXP

USB Plug & Play

Low power consumption

Support X-Link for PSP on-line games